Product Description

- One remote control for One dog, two dogs training at same time.
- 100 levels of electronic-shock/vibrating for different conditions
- The strong static impulse can penetrate the hair of the pet and fabric within 6mm thick. It is unnecessary to let the discharging point touch the skin of the pet. Therefore it is safe for the pet.

-The static impulse can quickly and effectively curb the improper deeds of the pet.
- With the movement induction power switch in the collar receiver, it will turn on/off automatically to save power.
- Convenience of easy-to-read LCD screen shows the stimulation level.
- Over 3,000 different identity codes to prevent conflicts with other e-collars.
- Lightweight and non-obtrusive collar
- Pager non-electrical stimulation
- Soft collar is comfortable to wear (Waterproof collar)
- Strongest electronic shock is effective for big dogs
- Vibration makes communication with your dog in gently
- 328 yards away from the control
- Fit most kind of dog from 10 lbs to 120 lbs.

---

Specification:

Collar
 Length: 43mm Height: 68mm Width: 38mm
 Weight: 56g (module + battery)
 Collar length adjustable from 12 inches to 20 inches
 Power: 2* 1.5V AAA battery (included)
 Water Resistant and shockproof
 
Handset
Length: 83mm Height: 25mm Width: 45mm
Weight: 40g (with battery)
Power: 2* 4A76 6V batteries (included)
LED signal light and illumination at night
The sound function for attracting attention

---

PLEASE NOTE:
This item is great for two Small to Medium dogs. We don't recommend it for small dogs as the receivers will look relatively a little too big for small dogs. But they can be used for any dog size if you don't mind the receiver size on your dog's neck.

With the movement induction power switch in the collar receiver, it will turn on/off automatically to save power. About 5 minutes, without movement, it will turn off, and with movement it will turn on again.

---

Matching Receiver and Transmitter:
- Turn on the transmitter by the switch on right side of it

-  Install the batteries for the receiver. The LED insinde the receiver starts to keep flashing. Press vibration or shock button immediately after batteries are put into the receiver firmly. Then the LED will stop flashing and only light which indicates that the transmitter and the receiver have matched each other successfully.

-  If LED stops flashing on its own without press any button in the transmitter, tanke out the batteries. Wait for at least 10 Seconds and try step 2 again.

-  Put the cover on the receiver firmly

-  Attach the receiver to the collar.

---

Note:
Dear Customers,befor use this item, you should to set the code of the remote and each receiver right up.then they will be ok for work.Please follow my words to set the code up.

1.At first,please install the batteries into the remote ,then install the receiver.
Press the "Y " key of remote after receiver issues "D" sound,
then receiver will give you a "D" sound again. 
it means you got them synchronous.
 

2.Please press the button of "Mode" 3 seconds untill the AC-PDP Show than "000" ,it means that the remote is ok. then press any button of the "mode" ,the first one is "shocking" ,the second is "vibration" ,the third one is  "noise" ,the last one is "Light" .

 


3. Then press UP/DOWN button at the right side of the remote ,then set the model to anyone, press the up button begin at 001,press the down button begin at 100.

 


If there is no action for a while, the remote will be automatically in power-saving mode, you need to press the "MODE" button for a second to use it again 

---

Package include:
 1 x Remote Transmitter
1 x Receivers
1 x Adjustable collar
2 x 4A76 6V batteries
2 x 1.5 AA batteries
2 x Metal prongs & shock testers
1 x Manual

Payment Terms︰ tt

Product Image