The recording machine Training collar User’s Manual
Thank you for choosing our product!
Please read this manual carefully before using the product.
Please do read the Cautions, for fear that unwanted results arise from improper operation.
Features:
1 The tiny digital recorder is tied to the dog. Instead of shouting, the master just need to give the “sound order” by the remote controller
2 The six “sound orders “ can be recorded separately and be changed again and again.
3 The six buttons on the remote controller correspond with six “sound orders”.
4 The recording process is easy , and it is convenient to transmit the “sound order” to the dog with the remote controller.
5 The sound can be repeated and it is laconic and clear , which can help the dog understand the order from the master easily.
6 The product will offer you high-capacity rechargeable lithium batteries and dedicated charger.
Operational instructions：
1.0 Charge the recorder..
1.1You must charge the recorder with the dedicated charger the product offer.
1.2 Plug the charger to the charging hole of the recorder( follow the first picture). The charger will adjust to AC90-250V automatically. Please check that whether the charger plug is suitable .
1.3 During the charging process , the red indicator light of the recorder will flash. If the charging is over , the indicator will stop flashing. The charging process usually last 1-2 hours .
1.4 After being charged , the recorder will full of power, then it can support the recorder to stay in the state of standby (the power switch is on ) over twelve hours or to continuously transmit the “ sound order “ over 100 times. If the power switch is turned off , the battery power can be maintained for more than 15 days
2.0 Recording
2.1The method to play the recorder : press the power switch for about 3 seconds until the red power indicator light lights . Similarly , if you want to turn off the recorder , press the power switch for about 3 seconds until the red indicator light is off after flashing.
2.1 The six recording buttons can record six different “ sound orders “ correspondingly .Each recording should be finished in 4 seconds .
2.2 Press the recording button (1.2.3.4.5.6) with a small hard-cylinder (such as toothpick and small screwdriver ) until the recording is over.
2.3 When pressing the recording button , the yellow indicator light will light , and it will make a “B “ sound , which means it is begin to record. Four seconds later , it will make a “BB” sound , and the indicator light will be off , indicating the recording is over.
2.4 You can press the corresponding play button to listen to the recording . Please remember which “sound order” the button stands for , it can help you train your dog .
2.5 Follow the same method , you can record another five “sound orders “or you can change any of them.
3.0 How to wear the recorder.
3.1 There are two ways for you to choose to tie the recorder to the dog.
3.2 The recorder can be tied to the dog’s neck with a collar.
3.3 Also , you can tie the recorder to the dog’s back with two nylon belts.
3.4 The way the dog wear the collar depends on the effect of wearing and the master’s taste.
