A-101 Vibration No-Bark Collar
The characters of our product :
1 The newest intelligent transmission system is capable to identify the sound of the dogs. Besides, the “stop” function won’t work if the sound isn’t from the right dog .In that case, we can avoid making mistakes.
2 The set won’t vibrate at the first bark , but if the bark last , the vibration time will lengthen gradually from the second bark to the six bark .And if the bark still continue at the highest frequency vibration the set will stop automatically for about 2 or 3 minutes and then get right .
3 The vibration remind is safe and effective . It is a fatherly collar without electric shock
4 The allowable bark level is adjustable. The master can decide the bark level according to their need.
5 The vibration level can be adjusted ,the masters can adjust the level according to the personalities of their pets.
6 The small battery is easy to change. And the battery can support the vibration more than 100 times
7 The nylon collar is easy to adjust and comfortable to wear
8 The waterproof collar is small and light.
he system includes :
1 a waterproof vibration set
2 a nylon collar which is easy to adjust and wear
3 six small batteries which are easy to buy :AG13 /LR44
4 a special screwdriver used to adjust the level of the allowable bark and vibration
preparation before using
1.0 test and adjust the vibration set
1.1 How to install the batteries :
1.1.1 open the oblong cover
1.1.2 Put the collar in the flank side, and cathode of the cell bucket is above .
1.1.3 Put the three AG13/LR44 batteries into the cell bucket parallelly keeping the anode of the batteries upward
1.1.4 Observe the LED indicative light , it will flash once every 5 seconds or just once every second in the case of the exploration pole has signal
1.2Take down the batteries
1.2.1 Open the oblong cover
1.2.2 Pull the meshbelt ,then the batteries will go out .
1.3 Test the vibration set
1.3.1 Please adjust the vibration to the lightest frequency level (counterclockwise), which is convenient to test the vibration phenomenon.
Please notice that the adjustment has only half of the circle (180 dimension).Don’t revolve it overly or it will be damaged .
1.3.2 Make the exploration pole slide along the firm and non-glassed surface lightly .While sliding it will make a vibration which resembles the vibration of the sound track , and the LED light will flash.
1.3.3 LED light turn to flash quickly at the first slide ( is equal to the first bark ), reaching flashing once every second , it also flashes quickly at the second slide , and the collar will vibrate for about 2 seconds .Between the two slides ,3 to 5 seconds is the safe period . The vibration will last longer if it is caused by continual bark .
1.3.4The vibration will last for about 5 seconds if it is caused by the sixth bark , after vibrating ,the vibration set will stop for about 2 or 3 minutes safely and then it will recover to the initial condition
1.3.5 In the case of the allowable bark level is increased ( clockwise), the slide friction must be strong enough to cause the vibration .Please don’t use the friction overly while testing to prevent the product being damaged
1.3.6 Sliding on the soft surface won’t cause the vibration .
1.3.7 When the collar is clung to the human’ neck ( the part which we touch with our hands and feel vibration while speaking ) ,if he shouts loudly , it also vibrate .
1.4 Fix the nylon collar
1.4.1 Our product matches a stretchy nylon collar which measures 20MM in width.
1.4.2 You also can choose 16MM wide meshbelt which is suitable to the small pets .
